How to use the Original Band Canon
Immediately below is a link to a You Tube video showing how to use the Band Canon. Like Subscribe.
Below that is a written step by step with clear photos showing how to use the Band Canon.
Lift each band over the peg above where the band comes out.
It should look like this when you have finished.
Lift the rest of the bands over the pegs.
The device should look like this now.
To activate place against the skin of the sub and press down firmly but gently.
Pushing slowly will release the bands one by one.
Pressing down quickly will release all the bands at the same time.
Adding more power
You can add power by hooking the bands over pegs that are further away thus increasing the energy in the rubber band.
In this photo there are 2 bands one is hooked on the peg vertically above its opening and one is on the one over from the peg above.
You can also experiment with different types of rubber band. See the band replacement guide to do ths.